28233374 Inlet Metering Valve fitted on VOLKSWAGEN POLO/ AUDI A1 04B 130 755 CR Pump 28395883 for Engine CXXB 1.6/ CAAC 2.0 tdi
Product Description
| OE Number: | 28233374 | Description: | Inlet Metering Valve |
| Warranty: | 12 Months | Material: | Iron and plastic |
| Delivery time: | 7-15 days for bulk order/ 1-5 days for sample order | Packing: | Customized/Natural/Henshine |
| Surface Finish: | NEW/ Original Quality | Colour: | Brown and Silver |
| Fitted on: |
| AUDI |
| A1 (8X1, 8XK) |
| Typ: 1.4 TDIolej napędowyKod silnika: CUSBPoj.: 1422 cm3Moc: 90 [KM], 66 [kW]Data produkcji:10.2014 - 9.2018 |
| A1 Sportback (8XA, 8XF) |
| Typ: 1.4 TDIolej napędowyKod silnika: CUSBPoj.: 1422 cm3Moc: 90 [KM], 66 [kW]Data produkcji:10.2014 - 9.2018 |
| A3 (8V1, 8VK) |
| Typ: 1.6 TDIolej napędowyKod silnika: CRKB, CXXB, DBKAPoj.: 1598 cm3Moc: 110 [KM], 81 [kW]Data produkcji:8.2013 - 11.2017 |
| Typ: 1.6 TDIolej napędowyKod silnika: DDYA, DGTEPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:1.2017 - 9.2020 |
| A3 kabriolet (8V7, 8VE) |
| Typ: 1.6 TDIolej napędowyKod silnika: CRKB, CXXBPoj.: 1598 cm3Moc: 110 [KM], 81 [kW]Data produkcji:1.2014 - 9.2020 |
| Typ: 1.6 TDIolej napędowyKod silnika: DDYAPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:3.2017 - 9.2020 |
| A3 Limousine (8VS, 8VM) |
| Typ: 1.6 TDIolej napędowyKod silnika: DDYAPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:2.2017 - 9.2020 |
| Typ: 1.6 TDI quattroolej napędowyKod silnika: CXXBPoj.: 1598 cm3Moc: 110 [KM], 81 [kW]Data produkcji:4.2015 - |
| Typ: 30 TDIolej napędowyKod silnika: DGTEPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:6.2018 - 9.2020 |
| A3 Sportback (8VA, 8VF) |
| Typ: 1.6 TDIolej napędowyKod silnika: CRKB, CXXB, DBKAPoj.: 1598 cm3Moc: 110 [KM], 81 [kW]Data produkcji:8.2013 - 9.2020 |
| Typ: 1.6 TDIolej napędowyKod silnika: DDYAPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:1.2017 - 9.2020 |
| Typ: 1.6 TDI quattroolej napędowyKod silnika: CXXBPoj.: 1598 cm3Moc: 110 [KM], 81 [kW]Data produkcji:4.2015 - 7.2016 |
| Typ: 30 TDIolej napędowyKod silnika: DGTEPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:6.2018 - 9.2020 |
| Q2 (GAB, GAG) |
| Typ: 1.6 TDIolej napędowyKod silnika: DDYAPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:5.2016 - 9.2018 |
| Typ: 30 TDIolej napędowyKod silnika: DGTEPoj.: 1598 cm3Moc: 115 [KM], 85 [kW]Data produkcji:6.2018 - |
| VW |
| CALIFORNIA T6 Camper (SGC, SGG, SHC) |
| CRAFTER Autobus (SYI, SYJ) |
| CRAFTER Platforma / podwozie (SZ_) |
| CRAFTER Skrzynia (SY_, SX_) |
| GOLF ALLTRACK VII Variant (BA5, BV5) |
| GOLF SPORTSVAN VII (AM1, AN1) |
| GOLF VAN VII Variant (BA5) |
| GOLF VII (5G1, BQ1, BE1, BE2) |
| GOLF VII Van (5G1) |
| GOLF VII Variant (BA5, BV5) |
| GRAND CALIFORNIA Camper (SCB, SCC) |
| MULTIVAN VI (SGF, SGM, SGN, SHM, SHN) |
| POLO V (6R1, 6C1) |
| POLO Van (6R) |
| TRANSPORTER VI / CARAVELLE VI Autobus (SGB, SGJ, SHB, SHJ) |
| TRANSPORTER VI Platforma / podwozie (SFD, SFE, SFL, SFZ, SJD |
| TRANSPORTER VI Skrzynia (SGA, SGH, SHA, SHH) |
Check the video of Inlet Metering Valve 28233374 on Youtube
Ningbo Henshine Precision Machinery Co., Ltd
Detailed Photo:
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)
FIGURE 2 VW GOLF VII IMV Valve 28233374 Fitting on 28470303 CXXB 1.6 TDI
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)
FIGURE 3 AUDI A1 FL Inlet Metering Valve 28233374 with Common Rail 04B 130 089 G
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)
| Make: | AUDI/ VW/ SEAT/ SKODA |
| Model: | A1/ A3/Q2/ GOLF/ POLO/ CALIFORNIA T6/ LEON/ FABIA & etc |
| Submodel: | / |
| Engine Type: | / |
| Engine Family: | CXXB 1.6 tdi/ CAAC 2.0 tdi/ 1.4 TDI CUSB CYZB CUTA |
| Engine Size: | / |
| Fuel Type: | Diesel |
| Regulator Usage: | Fuel Supply Pump Repairing |
| Replaces OEM Part Number (application): | Instead of Delphi 9109-946 |
Condition: Brand NEW
Manufacturer Part Number: 28233374
Other Numbers: 9109-946/ GM 251*791/ A6510*084/ Delphi 7135-818
Manufacturer: Made by HENSHINE
Pump: 04B 130 755 F/E/G/H & etc
Type: Inlet Metering Valve/ IMV
Min Sample Order: 15 pcs
Production Capacity: 3600 pcs/month
Means of Transport: Ocean, Land, Air, Express
Payments: Visa, Mastercard, T/T, WesternUnion, Online Transfer, Cash on pickup
Volkswagen transporter t6 04B 130 755 E 28395883
Fuel Injector Assy 04B 130 277 J VW GOLF VII
Common Rail 04B 130 093 VOLKSWAGEN POLO 6C
Rail Perssure Sensor 04L 906 054
Rail Pressure Limiting Valv -DRV 057130764AB 0281006075
28233374 Inlet Metering Valve fitted on VOLKSWAGEN POLO/ AUDI A1 04B 130 755 CR Pump 28395883 for Engine CXXB 1.6/ CAAC 2.0 tdi
+Diesel Common Rail System/Fuel Supply System
-Components of Fuel Injection Pump/ Supply Pump
-IMV Valve/Fuel Pressure Regulating Valve; Inlet Metering Valve
282233374 Inlet Metering Valve for Fuel Supply System Fuel Pump used on GM/HYUNDAI/MERCEDES-BENZ/VW AG & etc Made by Ningbo Henshine Precision Machinery
The Inlet Metering Valve 28233374 is generally installed at the inlet of the high-pressure fuel pump. It is a proportional solenoid valve, controlled by the electronic control unit (ECU), which can control the amount of oil entering the high-pressure fuel pump, thereby controlling the oil pressure in the common rail pipe. The good work of this component can not only ensure
that the vehicle can run normally but also enable the engine to run in the most fuel -- efficient state to achieve the effect of saving fuel.
2022-08-14
What is a SCV? >> check here
The Inlet Metering valve (IMV) controls the fuel pressure in the common rail diesel engine. The use tolerance of IMV is very small and will soon be affected by contaminated fuel and / or fouling.
When the valve is activated, the force of the electromagnet aids the spring, reducing the opening of the valve and so increasing fuel pressure. The valve also acts as a mechanical pressure damper, smoothing the high frequency pressure pulses emanating from the radial piston pump when less than three pistons are activated.
An ECU operated Inlet metering valve (IMV) or Pump Metering Control Valve (FMCV) located on the back of the high-pressure supply pump is utilised for this purpose. which controls the output volume and pressure in the fuel rail.
Generally, the IMV is available as a replacement unit for a range of CRD supply pumps.
The supply pump only compresses the amount of fuel needed to maintain the rail pressure required.
This assists in reducing emissions by reducing engine operating load.
Reducing fuel flow during operation also results in lower fuel temperatures.
Common typical faults affecting IMV operation.
Excess wear, contaminated fuel or an electrical malfunction with the SCV or IMV can create major driveability problems and possible no start condition.
A fuel pressure regulator, also named a Inlet Metering valve, or IMV valve, helps maintain the fuel pressure in the Fuel Injection System. If the fuel injection system needs more fuel pressure, the fuel pressure regulator releases more fuel to go to the engine. This is vital because that is how the fuel gets to the injectors. Blocking the pass-through to the fuel tank off completely, the fuel pump will try to force too much fuel into the injectors which will cause them to fail and you will end up needing another auto repair service.
As you could see, the pressure regulator plays a critical role in the common rail diesel injection system.
A good factory, a good supplier with stable quality, and follows IATF16949 rules strictly.
After being tested by many of our customers in Europe and the Americas, this pressure regulator is a good replacement for OE diesel parts, like 28233374 Diesel Metering Valve.
Ningbo Henshine Precision Machinery Co., Ltd>>>About Us
see in map: 7# Bangxing Road, Maoshan Industrial Park,
Jiangshan Town,Ningbo,China
See in Facebook:
Ningbo Henshine Precision Machinery Co., Ltd
See in Linkedin:
Ningbo Henshine Precision Machinery Co., Ltd
See in Tiktok:
See in Twitter:
Ningbo Henshine Precision Machinery Co., Ltd
See in Instgram:
See in Pinterest:
Ningbo Henshine Precision Machinery Co., Ltd
See in Youtube:
Ningbo Henshine Precision Machinery Co., Ltd
Exploded View
AUDI A1/ VOLKSWAGEN POLO CXXB 1.6 TDI ENGINE PUMP ASSY - HIGH PRESSURE 04B 130 755
| № | Name | Ext. inf. | A* | Part number | A |
| 1.4ltr. | |||||
| 1 | high pressure pump | 1 | 04B 130 755 E | 2 | |
| 1 | high pressure pump | 1 | 04B 130 755 F | 3 | |
| 2 | hub included in position: | 3 | |||
| 3 | toothed belt pulley | 1 | 04B 130 101 | - | |
| 3 | toothed belt pulley | 1 | 04L 130 101 | - | |
| 4 | hexagon collar nut M18X1,5 | M18X1,5 | 1 | WHT 002 244 | - |
| 5 | spring band clamp A9,5X8,4 | A9,5X8,4 | 1 | N 107 572 01 | - |
| 6 | socket head bolt with inner multipoint head M8X50 | M8X50 | 1 | N 106 720 01 | - |
| 7 | flat head multi-point socket bolt M8X30 | M8X30 | 2 | N 106 650 01 | - |
| 8 | fuel rail | 1 | 04B 130 093 | - | |
| 9 | pressure sensor M18X1,5 | M18X1,5 | 1 | 04L 906 054 | 2 |
| 10 | o-ring 16X1,5 | 16X1,5 | 1 | N 904 519 02 | - |
| 11 | pressure-relief valve | 1 | 057 130 764 AB | 3 | |
| 12 | hex collared bolt M8X35 | M8X35 | 1 | N 106 756 02 | 13 |
| 13 | double stud with hexagon drive M8X30/M6X16 | M8X30/M6X16 | 2 | N 910 890 01 | - |
| 14 | hexagon bolt M8X50 | M8X50 | 2 | N 106 408 01 | 1 |
| 15 | pressure pipe D >> - 25.08.2014 | 1 | 04B 130 321 H | - | |
| 15 | pressure pipe D - 26.08.2014>> | 1 | 04B 130 321 G | - | |
| 16 | clamp 1-6X15 | 1-6X15 | 1 | N 911 711 01 | - |
| 17 | hexagon socket flat head bolt M6X12 | M6X12 | 1 | N 103 352 06 | - |
| 18 | pressure pipe D >> - 25.08.2014 cylinder 3 | 1 | 04B 130 303 C | - | |
| 18 | pressure pipe D - 26.08.2014>> cylinder 3 | 1 | 04B 130 303 B | - | |
| 19 | pressure pipe D >> - 25.08.2014 cylinder 2 | 1 | 04B 130 301 M | - | |
| 19 | pressure pipe D - 26.08.2014>> cylinder 2 | 1 | 04B 130 301 L | - | |
| 20 | pressure pipe D >> - 25.08.2014 cylinder 1 | 1 | 04B 130 301 M | - | |
| 20 | pressure pipe D - 26.08.2014>> cylinder 1 | 1 | 04B 130 301 L | - | |
| 21 | fuel pipe return | 1 | 04B 201 360 | - | |
| 22 | oval hexagon socket head bolt M6X16 | M6X16 | 1 | N 910 967 01 | - |
| 23 | return line | 1 | 04B 130 235 B | - | |
| 24 | o-ring 2,8X1,5 | 2,8X1,5 | 3 | 059 130 119 | 1 |
| 25 | injector unit | 3 | 04B 130 277 J | 1 | |
| 26 | o-ring 16,2X1,5 | 16,2X1,5 | 3 | WHT 000 884 | - |
| 27 | seal ring injector unit 7,015X2,0 | 7,015X2,0 | 3 | 03P 130 519 | - |
| 28 | clamping piece | 1 | 04B 130 216 A | - | |
| 28A | clamping piece | 1 | 03L 130 216 | - | |
| 29 | socket head bolt with inner multipoint head M6X90X37 | M6X90X37 | 1 | WHT 005 490 | - |
| 29A | socket head bolt with inner multipoint head M6X38X20 | M6X38X20 | 1 | WHT 006 449 | - |
| 30 | bracket | 1 | 04B 130 389 A | - | |
| 31 | socket head bolt with inner multipoint head M8X20 | M8X20 | 1 | N 910 268 02 | - |
| 32 | socket head bolt with inner multipoint head M8X20 | M8X20 | 1 | N 910 268 02 | - |
| 33 | bracket | 1 | 04B 130 379 A | - | |
| 34 | spring band clamp 14,5X12 | 127-000,9 | |||
| 35 | 14,5X12 | 2 | N 909 865 01 | - |
OE CODE
Producent OE CODE
DELPHI 9109-946
DELPHI 28233374
GENERAL MOTORS 25187791
HYUNDAI 33115-2A700
INFINITI 16756-HG00B
MERCEDES-BENZ A651 074 0084
SSANGYONG 6730750001
Fuel System Parts
| Pump | Injector | Common Rail | Sensor | Pressure Limiter Valve |
| 04B 130 755 E | 04L 130 277 AC | 04B 130 089 G | 04L 906 054 | Pressure Discharge Valve |
| 04B 130 755 F | 04B 130 277 J | 04B 130 093 | 04L 906 054 | 057 130 764 AB 0 281 006 075 |
| 04B 130 755 G | / | / | / | / |
| 04B 130 755 H | / | / | / | / |